Any Roxor owners in Iowa?

[SlurpJung]

The nearest dealer is 3 hours each way and I was hoping I could find someone with one I could look at before I pull the trigger and purchase one. Mainly just curious how thick the sheet metal is and if the undersides are holding up to rust. If I buy one I would specifically be looking for a 2018-2019 but as far as looking at one I wouldn't care what year it is. Located in southern Iowa but work up in Des Moines. If you've got one I could check out I'll bring the beer!

 

[Tim R]

The nearest dealer is 3 hours each way and I was hoping I could find someone with one I could look at before I pull the trigger and purchase one. Mainly just curious how thick the sheet metal is and if the undersides are holding up to rust. If I buy one I would specifically be looking for a 2018-2019 but as far as looking at one I wouldn't care what year it is. Located in southern Iowa but work up in Des Moines. If you've got one I could check out I'll bring the beer!

Hi SlurpJung I live by Elkader Iowa north east Iowa a little bit further than Des Moines if you want to drive that far

 

[SlurpJung]

I've got a buddy that lives in Dubuque I'll keep that in mind next time I go see him. Thanks for the offer!

 

[Campyman]

I can tell you the body is made of steel..... probably around 22g.

Owners have found the body is a bit more prone to rust. Probably because the assembly workers aren't painting everything that well. You'll notice under the transmission and transfer case are iron, but are not painted. These are things owners address on their own and it's usually easy to resolve.

 

[Tim R]

I can tell you the body is made of steel..... probably around 22g.

Owners have found the body is a bit more prone to rust. Probably because the assembly workers aren't painting everything that well. You'll notice under the transmission and transfer case are iron, but are not painted. These are things owners address on their own and it's usually easy to resolve.

Sounds good send a message maybe we can get together

 

[SlurpJung]

I can tell you the body is made of steel..... probably around 22g.

Owners have found the body is a bit more prone to rust. Probably because the assembly workers aren't painting everything that well. You'll notice under the transmission and transfer case are iron, but are not painted. These are things owners address on their own and it's usually easy to resolve.

I've kind of got the impression paint quality in certain places isn't the greatest for example I've seen pics of several where the engine block is covered in rust already so I could certainly see what you're talking about being true. I had already been thinking about rust proofing the underside and doing something with the wheel wells because it would only be a weekend toy and I'd want it to last.

 

[Cobra1six]

 

[Cobra1six]

I used this stuff on engine and underside parts. Easy to use and a little goes a long way.