ooooooooooo

Bumper

Shortbus

Shortbus

Active member
Lifetime Member
Joined
Aug 26, 2018
Messages
152
Points
28
Location
Phoenix, AZ, USA
Roxor #
1247
Roxor Ownership
Roxor Owner
Does anybody know if a Jeep bumper will fit the front of the Roxor somehow mine already got bent up??
 
I just ordered a CJ7 bumper and it doesn't fit :{. It was an EAC from Amazon. We need stubby bumpers so bad.
 
While not a Jeep bumper, just installed an OnTheRox front bumper and am very pleased with the quality, fit and finish. It's a bit shorter than OEM Classic bumper, leaving plenty of room for larger tires, and definitely more stoutly constructed.
 
I pulled my bumper, its just light guage sheetmetal, like the body thickness.
I am installing the bumper shown below - they are like 250. I just have to make 2 brackets to adapt it - very straight forward, but I have a shop.

If it wasn't for the shipping cost on the rox fabs bumper would have been a good choice
20180908_111728(1).jpg
 
I installed a Tj winch bumper with the supplied u bolts but I wouldn’t feel comfortable mounting a winch on it and using it. I looked at the measurements for all of the Jeep models from 48-current. The Tj matched the closest. A non winch mount Tj bumper would work fine using the winch plate already mounted on the LE models.

7F26F33A-1122-49F2-B0C7-AE05283E992A.jpeg
 
Jimmyb said:
I installed a Tj winch bumper with the supplied u bolts but I wouldn’t feel comfortable mounting a winch on it and using it. I looked at the measurements for all of the Jeep models from 48-current. The Tj matched the closest. A non winch mount Tj bumper would work fine using the winch plate already mounted on the LE models.

View attachment 1177
Click to expand...
How many mods were needed for attachment of this bumper?
Who did you get it from?
 
BigDaddy said:
I pulled my bumper, its just light guage sheetmetal, like the body thickness.
I am installing the bumper shown below - they are like 250. I just have to make 2 brackets to adapt it - very straight forward, but I have a shop.

If it wasn't for the shipping cost on the rox fabs bumper would have been a good choiceView attachment 1176
Click to expand...
Where did you get this bumper?
 
HVSKERZ said:
How many mods were needed for attachment of this bumper?
Who did you get it from?
Click to expand...
The bumper is EAG, no modifications. It clamps on with some thin u bolts. Looks good but the cheap mount makes it almost unusable
 
Jimmyb said:
The bumper is EAG, no modifications. It clamps on with some thin u bolts. Looks good but the cheap

Thinking about getting one and building a modified attachment so it is usable...
Click to expand...
 
It would work great if you made some actual mounts for it. It shouldn’t be to hard
 
Sorry for all the questions but will the Spare tire and holder from Roxor work still and be able to fit into that slot on the rear bumper?
 
Bfree said:
Sorry for all the questions but will the Spare tire and holder from Roxor work still and be able to fit into that slot on the rear bumper?
Click to expand...

Yes, depends somewhat on how you mount the bumper, but there is room there for the tire.
 
BigDaddy said:
I pulled my bumper, its just light guage sheetmetal, like the body thickness.
I am installing the bumper shown below - they are like 250. I just have to make 2 brackets to adapt it - very straight forward, but I have a shop.

If it wasn't for the shipping cost on the rox fabs bumper would have been a good choiceView attachment 1176
Click to expand...
Great looking bumper! Did it mount ok?
If so do you have pics?
 
You must log in or register to reply here.

Similar threads

txroadkill
Rear Bumper flex
Replies
12
Views
4K
Tinfoil Hat
Tinfoil Hat
S
Solved my bumper problem
Replies
17
Views
4K
Roxasuras
Roxasuras
Back
Top