ooooooooooo

EATON LIMITED SLIP

Bob R1

Active member
Lifetime Member
Joined
Mar 1, 2023
Messages
493
Points
43
Location
Missouri Ozarks
Roxor Ownership
Roxor Owner
Has any one put a DANA 44, 19 Spline Eaton Limited Slip Unit in the back of a Roxor?
This might work on the front also. I was talking to some one who said they had a Scout years ago with Limited Slip in both the front and back.
This looks to me like the way to go VS a Locker for those of us who do not Rock Crawl, and just need more traction for daily use.

Bob R
 
I would like to find a source for an Eaton Detroit Truetrac with 19 spline but I don't think they are still produced. They do sell 30 or 32 spline.
 
I don't think you will find a TrueTrac, here are some other options.

Pay attention to the gear ratio when ordering.



 
Has any one put a DANA 44, 19 Spline Eaton Limited Slip Unit in the back of a Roxor?
This might work on the front also. I was talking to some one who said they had a Scout years ago with Limited Slip in both the front and back.
This looks to me like the way to go VS a Locker for those of us who do not Rock Crawl, and just need more traction for daily use.

Bob R

I don't think you will find a TrueTrac, here are some other options.

Pay attention to the gear ratio when ordering.



I installed an Auburn LSD in rear axle of my 2024, along with Torque Locker in front axle.So far it has been a great experience.
I was able to use my oem gearing (5.38) along with a ring gear spacer.
The factory carrier is 2.25” which is in between the 2 - 44 carriers made.
3 series - 2.090”
4 series - 2.410”
So you would want to get the 3 series posi and add a spacer to it. It will then match your factory carrier and take the OEM ring and pinion. I purchased the ring gear spacer from Brennan's Garage but was under the impression he is no longer producing them. The spacer will make the carrier within .010 of 4 series posi. I do know that ECGS will carry them and they also have the Auburn LSD.
 
Last edited:
Very nice to know that someone has actually installed a limited slip in a Roxor, and it worked well.
Much more comforting that being 95% sure that it will work from reading about the unit in an old Jeep.

The Limited Slip in the rear along with the Diesel Freak Twin Stick Modification will really make the Roxor a lot more use-able off road.
Bob R
 
Very nice to know that someone has actually installed a limited slip in a Roxor, and it worked well.
Much more comforting that being 95% sure that it will work from reading about the unit in an old Jeep.

The Limited Slip in the rear along with the Diesel Freak Twin Stick Modification will really make the Roxor a lot more use-able off road.
Bob R
Yessir I have the Twin Stick Modification ordered for mine as well speak.
 
Auburn Gear High Performance Series 19 Spline Differential Dana 44 5420112

I had this installed front and rear on mine in 2019. They mechanic that did mine had to change the carrier I believe, I should probably have asked more about it. I've had no issues with snow/ice. Also put in warn front locking hubs.
 
Back
Top