Keep it from being stolen.

[FredFlintstone]

Hi All,

I just got a 2022 a couple of weeks ago and was afraid to take it to the store or church because I was afraid it could be hot wired. I know some people put in kill switches but I don't enough about diesels to start cutting wires so I came up with this idea... A heavy Aluminum bar with a pad lock to keep the clutch from being press down, I saw some of the same idea on amazon but couldn't not find any that would fit the way I would like....It actually works, no matter which way you turn the bar it will not allow the clutch to be pressed, I know they could cut the lock but still gives me some piece of mind..... Just thought I would share....This Roxor is so awesome...

Ken

 

[FredFlintstone]

I think they could force it into neutral. The Wedge under the handbrake sounds like a good idea...

Thanks for the feedback, I am really enjoying my roxor and don't want to lose it......

 

[txroadkill]

Unplug the clutch switch and use a piece of wire or paper clip and you’ll be able to start the engine right up. Then just float the gears and your gone. Granted the young crowd probably has no idea how to shift a manual much less float gears so there’s that. In my case I have a mini fuse in the plug socket so I can start mine without pressing the clutch. Useful if you wheel it and it stalls on an incline. If I were you I’d look for a better solution.

 

[Joxor889]

Man, if I had to do all that to prevent it from being stolen I would move.

 

[FredFlintstone]

Thanks for the feedback... I only wanted to make it a little harder to steal if I take it to wal-mart... I am not worried about storage at home....

 

[CJ2Rox]

When I lived in AZ I got a truck stolen and car broken into. I've very protective of my Rox. I have a kill switch hidden under the dash. I only use my clutch to get going then I float. I love the idea you got there.

 

[FredFlintstone]

When I lived in AZ I got a truck stolen and car broken into. I've very protective of my Rox. I have a kill switch hidden under the dash. I only use my clutch to get going then I float. I love the idea you got there.

If you get a chance could you describe how you installed the kill switch. I put one on my willys years ago but I wasn't sure how to do it on the roxor..

Thanks

 

[CJ2Rox]

I just ran it off the ignition switch on a toggle under the dash. If toggle is flipped the ignition is dead. Ran the hot through the switch

 

[FredFlintstone]

Thanks.....

 

[Uncle Chuck]

Hi All,

I just got a 2022 a couple of weeks ago and was afraid to take it to the store or church because I was afraid it could be hot wired. I know some people put in kill switches but I don't enough about diesels to start cutting wires so I came up with this idea... A heavy Aluminum bar with a pad lock to keep the clutch from being press down, I saw some of the same idea on amazon but couldn't not find any that would fit the way I would like....It actually works, no matter which way you turn the bar it will not allow the clutch to be pressed, I know they could cut the lock but still gives me some piece of mind..... Just thought I would share....This Roxor is so awesome...

Ken

View attachment 11634View attachment 11635

Awesomely simple and still effective.

 

[CJ2Rox]

Another thing you could do it put the transfer case into neutral. Simple but effective. My CJ I had a club that went from the clutch pedal to the steering wheel

 

[CJ2Rox]

Steering Wheel Brake Lock Anti-Theft Device,FARBIN Vehicle Security Device, Anti-Theft Retractable Double Hook Car Clutch Pedal Lock,AntiTheft Car Device,Applicable to Any Vehicle https://a.co/d/a3Dihaw