ooooooooooo

New rims and tire recommendations

North

New member
Joined
Oct 12, 2025
Messages
4
Points
1
Location
Alberta
My work has recently purchased a 2023 Roxor and we are looking for what works for rim and tire size. We mostly drive on gravel roads so dont need anything to big.
 
I am running 235/85R16 10 ply mud and snow tires on factory rims. They are working out great. I have had the tires for one and a half years so far. I have 5K on them with no flats. Thinking back I believe I drove it to the tire shop and they found a nail in tire.
NOTE: Adjust the wheel stops so it will turn sharper.

Bob R
 
Last edited:
I am running 235/85R16 10 ply mud and snow tires on factory rims. They are working out great. I have had the tires for one and a half years so far.
NOTE: Adjust the wheel stops so it will turn sharper.

Bob R
Thanks Rob R. Are there any adaptors for the odd lug pattern? Having a hard time finding rims with the 5x139 in my area and need some spares.
 
5 x 139.7 is the same as 5 x 5.5" and is a very common bolt pattern. Amazon currently has Rough Country steel 16x8 wheels in this bolt pattern for $75 each.
 
33” tires run at 15psi
15” rims
 
You can find pics of my rig on this web site to see how it looks

With 5.38 gears I think you want the taller tire

The taller sidewall and lower pressure will soften the ride to smaller tires

35” are cool but will likely need a little triming/lift and things to get to get to work right
 
I put a set of 10x30x15's with 10in rims and deep lug atv tires. Love them for all terrain. Run them down to 12psi in sand. keep a compressor on board along with starting fluid and a torch. I always jack it up before inflation if the bead is broken before using the gas method.
another way to inflate is to use a ratchet strap around the tire keeping it centered and tighten. That has worked for me. In a pinch a chain and binder has worked to squeeze it.
 
Last edited:
Back
Top