Oil Filler Cap Removal

[BradsRoxor]

Has anyone took off their oil filler cap yet?

I tried to take mine off and it will loosen a bit when rotated counter clockwise then that is it.

Does it have threads and screw off or does it have tabs which need to rotated part way?

I put a lot of force on it by hand and didn’t want to break it!

 

[Sonnyd]

It is a press in, so you may have to wiggle it out gently with a flat top screw driver. Those gaskets were dry on mine when a removed the fill cap and it took some jimmying. I put a little coat of oil on the gaskets prior to reinstall and it went right back in. The fill cap is on top of the valve cover from what I remember and their is some vacume hose attached to it.

 

[cniemi28]

Yep, right in the middle of my oil change. Jimmy it with some screw drivers, it will come, just a pain

 

[BradsRoxor]

Ok thanks guys!
I will put a little oil on the seal when I put it back on.

 

[i303]

I did a quick tutorial video posted on Roxor FB.

Let me see if I can post it here direct.

If not, I have to use my laptop to post it on YT


Click this:

 

[BradsRoxor]

I did a quick tutorial video posted on ROXOR FB.

Let me see if I can post it here direct.

If not, I have to use my laptop to post it on YT


Click this:

Thank You!

Those were the two issues I was wondering about, and you knocked them out in 1 video!