wiper motor install

[helicable]

hi, I have a roxor wiper motor , its single speed , 4 wires red/black/yellow/blue , can any one tell how to wire it up? the red and black will run the motor constant, but I cant seem to get the park to operate correctly, I found similar wiring but will not work

 

[USMC]

Here is a basic 4 wire motor. You would need to verify which wire is which though. My motors are Sprague and yours could be a different manufacturer.

 

[Bob R1]

Normally you will need to use a Pull Knob automotive switch, along with a 5 Pin Relay for Park to work.
I have my Jeep YJ wiper motor wired up on a Two Position Rocker Switch. UP is Low Speed, DOWN is Hi Speed, and the Center position is off. NO PARK FUNCTION. I considered using a Pull Switch and the Relay, and decided to just go with a rocker switch matching my other switchs.

Bob R