Wesmertz
New member
I watched those videos! That was a project and a half!
ooooooooooo
It is still bit flappy but continue to improve this
Also if it did not work I can undo and go back to stock
How accurate you think that is?
teamroxor.com
Looks like extensive ROPS chopping is needed, to make the pillar work, but then your giving up rollover protection.
What do you think if you get the upper half 3-star window? You get a make shift pillar and you get a upper half window, thereby having a complete enclosure
3starindustries.com
Cj7 softop on Roxor
- Thread starter HuntingRifle11
- Start date
Crossfire
Member
soft top
Crossfire
Member
Please share some more pictures- the canvas is surely poping up
Crossfire
Member
Yeah this is as far I can go without removing factory ROPS , basically I built it on top of it . Not perfect but gives some protection when kids ride in back
It is still bit flappy but continue to improve this
Also if it did not work I can undo and go back to stock
Crossfire
Member
Crossfire
Member
Hi please see attached. It has a frame underneath . Still working on making it perfect...
- Joined
- Aug 13, 2021
- Messages
- 421
- Points
- 43
- Location
- Fort Myers, FL, USA
- Roxor #
- 0000
- Roxor Ownership
- Roxor Owner
How much work did it entail stretching the top?
- Joined
- Aug 13, 2021
- Messages
- 421
- Points
- 43
- Location
- Fort Myers, FL, USA
- Roxor #
- 0000
- Roxor Ownership
- Roxor Owner
That's nice! What frame does it have? It looks very professionally done
Crossfire
Member
It is the frame of Thar ( Bought from ebay), got the full kit( including the B- pillars ) but decided just to use the existing roll bars . Not Perfect but gives some protection from wind and rain. The other day it rained the rain got me from the opening on the driver side , but nothing from the canvas
- Joined
- Aug 13, 2021
- Messages
- 421
- Points
- 43
- Location
- Fort Myers, FL, USA
- Roxor #
- 0000
- Roxor Ownership
- Roxor Owner
How much are ypu in it for? And or expected total cost for the build?
Crossfire
Member
Total for frame plus canvas top about 680$, you can save some if you choose the black top , for some reason the brown top was expensive. Higher grade material or something. It does feel very durable. I figured some tricks along the way , wish I knew before I started this project, but not too pad.
- Joined
- Aug 13, 2021
- Messages
- 421
- Points
- 43
- Location
- Fort Myers, FL, USA
- Roxor #
- 0000
- Roxor Ownership
- Roxor Owner
With a windshield, your canvas configuration, the THAR complete doors, and B-pillar you can possibly fully enclose it for 2.5K to 3K dollars.
How accurate you think that is?
Crossfire
Member
Winshield : 400 ( max) , Thar Doors 1300 , Frame ( Includes B pillar and Canvas ) -800$, total like 2500$, I think you are right on and Quite possible.
Actually I think It is better, I took the half door approach. Now I look back and see, may be better approach to do full door, As I still get some cross winds and cannot use air conditioning
The other difference with B pillar is, the work gets bit more detailed as you will have to undo the factory ROPS, which I was not too confident If I can pull it thru in the time I had and might need bit more skill set. ( I am level 1 or 2 on a set of 5 , compared to the advanced stuff some of the guys do with their roxors here)
Also I am still stock, for the most part and I can go back to stock conditioning easily
Actually I think It is better, I took the half door approach. Now I look back and see, may be better approach to do full door, As I still get some cross winds and cannot use air conditioning
The other difference with B pillar is, the work gets bit more detailed as you will have to undo the factory ROPS, which I was not too confident If I can pull it thru in the time I had and might need bit more skill set. ( I am level 1 or 2 on a set of 5 , compared to the advanced stuff some of the guys do with their roxors here)
Also I am still stock, for the most part and I can go back to stock conditioning easily
- Joined
- Aug 13, 2021
- Messages
- 421
- Points
- 43
- Location
- Fort Myers, FL, USA
- Roxor #
- 0000
- Roxor Ownership
- Roxor Owner
Thar Doors, Windshield, B-Pillar, Bedliner painted, DIY Canvas Top on Bimini Boat. Diamond plated center dash
Thar Doors, Windshield, B-Pillar, Bedliner painted, DIY Canvas Top on Bimini Boat. Diamond plated center dash
teamroxor.com
Looks like extensive ROPS chopping is needed, to make the pillar work, but then your giving up rollover protection.
What do you think if you get the upper half 3-star window? You get a make shift pillar and you get a upper half window, thereby having a complete enclosure
Mahindra Roxor (2022+) - Soft Doors (Half Doors)
Complete your 2022 & newer Roxor UTV with modular soft doors from 3 Star Industries. Durable, weather-resistant & easy Velcro install. Made in the USA.
3starindustries.com
Last edited:
Crossfire
Member
True , that ca
True that can be done, I was just thinking if I need another 500$ for some plastic cover, If it is bit more rugged , sureThar Doors, Windshield, B-Pillar, Bedliner painted, DIY Canvas Top on Bimini Boat. Diamond plated center dash
Thar Doors, Windshield, B-Pillar, Bedliner painted, DIY Canvas Top on Bimini Boat. Diamond plated center dash
Looks like extensive ROPS chopping is needed, to make the pillar work, but then your giving up rollover protection.
What do you think if you get the upper half 3-star window? You get a make shift pillar and you get a upper half window, thereby having a complete enclosure
Mahindra Roxor (2022+) - Soft Doors (Half Doors)
Complete your 2022 & newer Roxor UTV with modular soft doors from 3 Star Industries. Durable, weather-resistant & easy Velcro install. Made in the USA.
Crossfire
Member
Regarding the other link he has done all the B pillars ( to me more detailed work) , if he finished it with Thar frame ( instead of Boat frame) would have made it much better.
- Joined
- Aug 13, 2021
- Messages
- 421
- Points
- 43
- Location
- Fort Myers, FL, USA
- Roxor #
- 0000
- Roxor Ownership
- Roxor Owner
I am not a big fan of three star products, as I think their products are inferior; however, I do like their upper half door configuration from personal experience. I do consider it an upgrade
