FRAME RUST PREVENTION

[Gypsyjon]

In the Roxor manual they suggest if you live in an area with salt air, like me right on Gulf of Mexico, that you spray the frame with anticorrosion stuff to keep it from rusting.
Has anyone done this?
If so, what did you use and is it working?
Right now I am thinking about RustOleum Cold Galvanizing spray.

Would appreciate any thoughts
TIA

 

[Bister]

I think, not sure, but some folks use Fluid Film. Lots of stuff on Youtube.

 

[echo3delta]

Might look at hercliner or rustoleum rust stop. Or any rubberized undercoating

Sent from my LM-V405 using Tapatalk

 

[PineCreek]

Raptor Liner!!!
Seriously. The Best

 

[Samyguy]

recycle, used ATF, spray it on with 2 gal lawn sprayer

 

[Roxasuras]

Fluid film or por 15

 

[Wm435]

Wd40 works too? Or will it strip the paint

 

[Gabe]

Sprayed the undercariage of mine with fluid film.

 

[USMC]

Try Eastwood Chemicals, they have been doing this for years.

 

[Max A.]

Oil or wax based is the best. Rubberized coatings and tends to trap moisture if it gets in and it also makes it a pain to work on later. I hate buring the stuff off when i have to do rust repairs for people.

 

[Roxasuras]

I try to clean the undercarriage with a undercarriage pressure wand first, so you are lubricating/spraying a clean surface.

 

[CTD03]

I undercoat on the side and I will tell you any lanolin based product will work. I used pfc,fluild-film,pb blaster makes some good stuff also just expensive. I would not do any hard coating that seal the frame. Wash,wash,wash is the best thing and dry it. they make a salt neutralizer that works great.

any questions on undercoating feel free to ask.