B
Bister
Guest
I did a short video for all my other accessories I put on, so why not the hitch and front D-rings.
ooooooooooo
Yep, sometimes even if you can fabricate stuff, it's just not worth it by time you add up all steps involved.
The D rings just bolt on with the existing holes and bolts that hold the bumper on.
Just drill the other 2 holes each side. Once you take the bumper off, you will see the frame already has the mounts for the other 2 holes with the nuts welded into the frame. So, you will just need 4 more bolts the right size.
B
Bister
Guest
And now that I have the hitch I can drag my trailers around.
- Joined
- Sep 25, 2018
- Messages
- 313
- Points
- 43
- Location
- Wellston, OK, USA
- Roxor #
- 000992
- Roxor Ownership
- Roxor Owner
I like your helper. I have one of those too. Always wanting to be where the action is.
B
Bister
Guest
He’s usually in his heated bed. He lives in my shop. He was a stray entact male, so I made a cat door and set him up with food and he stuck around. Nice cat. Then I took him in to the vet and got that ‘entact’ part taken care of. Lol
- Joined
- Oct 16, 2018
- Messages
- 24
- Points
- 3
- Location
- Soo, Michigan
- Roxor #
- 2720
- Roxor Ownership
- Roxor Owner
Are those the D-Rings from the accessories page on the Roxor site?
B
Bister
Guest
- Joined
- Sep 25, 2018
- Messages
- 313
- Points
- 43
- Location
- Wellston, OK, USA
- Roxor #
- 000992
- Roxor Ownership
- Roxor Owner
They are proud of them, but way easier the fabricating them myself.
B
Bister
Guest
Yep, sometimes even if you can fabricate stuff, it's just not worth it by time you add up all steps involved.
tecknomage
Active member
Heated cat bed... GOOD human...
Mark Hubbs
Member
Can the D rings be added to the stock bumper by adding the extra four holes?
B
Bister
Guest
The D rings just bolt on with the existing holes and bolts that hold the bumper on.
Mark Hubbs
Member
Bister, the reason I ask is that the stock bumper only has two holes on each side where it attaches to the frame. Looks like I would have to add two holes on each side and use nuts and bolts to hold the D rings. I wonder if it would be strong enough to tow with those holes added?
B
Bister
Guest
Oh, you have the basic bumper.
Just drill the other 2 holes each side. Once you take the bumper off, you will see the frame already has the mounts for the other 2 holes with the nuts welded into the frame. So, you will just need 4 more bolts the right size.
Mark Hubbs
Member
Excellent! Thanks, Bister!
mickeybobs
Active member
Harbor fright has them ...they bolt right on using holes in bumper no drilling $ 4.99 ....cant beat it .....
Vanishingpoint
Active member
I've seen the two bolt style there but not the 4 bolt.
mickeybobs
Active member
There is a 4 bolt D ring . $4.99
Vanishingpoint
Active member
I'll have to look for those. I couldn't find them on the site.
mickeybobs
Active member
Harbor fright sku 60323 or 96232 .... $4.99
