Keys-ignition and underseat lock box

[Doug]

Can't find a locksmith with blanks to make a spare set of keys. Dealer was no help. Anyone know where to get key blanks?

 

[RoxorYooper]

Can't find a locksmith with blanks to make a spare set of keys. Dealer was no help. Anyone know where to get key blanks?

Didn’t you get a spare set to begin with?

 

[Woodsman74881]

Check with a Mahindra tractor dealer. Keys are almost Identicle to my tractor keys.

 

[JMB3]

I think the ignition switch on mine is this product: http://colehersee.com.au/product/anti-restart-4-position-sealed-ignition-switch/ There's a link on that page for an email contact.

 

[Dagbailey]

Best I can find is aftermarket ilco 1679 key blanks.

 

[Tokarev]

Anyone found a source yet for key blanks with the rubber boot?

Sent from my SM-G930P using Tapatalk

 

[Mark Hubbs]

Home depot had blanks for the lock box that have smaller rubber grips and are easier to carry in the pocket. They could not make a copy of the ignition key. I took the rubber cup off of it so it will ride in the pocket easier.

 

[Eyellgeteven]

Best I can find is aftermarket ilco 1679 key blanks.

Has anyone tried one of these blanks?

 

[Wazzu]

ignition key blank from mahindra is available now. part # S0009.9DL01H-001

 

[Wazzu]

MSRP is $10.99

 

[Wazzu]

ignore that last part #. wrong # given to us from rep. I will get the correct number and post it

 

[Togo]

ever find the correct part number?

ive been looking around and I know it is a Cole Hersee key.

 

[Togo]

I think I’ve final found the key blank. Being a short double sided key can it be cut by a local vendor?

Cole Hersee 640 Key blank

 

[Eyellgeteven]

I bet a local key shop would be able to cut one for you...I'm curious if this key will work.

 

[Togo]

I emailed the website with a picture . Hoping they can either confirm that is the proper key or tell me which one it is. I’m wondering if like tractor keys all our keys are the same.
I enlarged the hole in it.

 

[Togo]

The Key has the number 640 pressed into the shank.

 

[Togo]

The guy at Lost a Key emailed me back and said that is the right key blank . I just ordered 2 blanks. I will keep y'all posted as to the outcome.

 

[Eyellgeteven]

The Key has the number 640 pressed into the shank.

You are right...I never noticed that. I might have to get a couple myself.

Edit: I ordered a couple of them.

 

[Togo]

You are right...I never noticed that. I might have to get a couple myself.

Edit: I ordered a couple of them.

i fixed the picture of my key. Is your key cut the same as mine.

 

[Eyellgeteven]

i fixed the picture of my key. Is your key cut the same as mine.

It's the same key, but it is cut differently. That thought had occurred to me...I know that Case backhoes (and other Case equipment) uses keys that are all cut the same. In other words, I can take my Case key and use it to start any Case tractor. I had hoped Roxors were different and I'm glad to find out the keys are cut different from each other.