ooooooooooo

Lube chassis/ suspension

CJ2Rox

CJ2Rox

Well-known member
Lifetime Member
Joined
Oct 30, 2020
Messages
826
Points
63
Location
Plymouth UT, USA
Roxor #
6475
Roxor Ownership
Roxor Owner
How often do you grease everything? I did mine a few months ago and feel like it's due again with all the extra noises
 
CJ2Rox said:
How often do you grease everything? I did mine a few months ago and feel like it's due again with all the extra noises
Click to expand...
The owners manual says every 400 miles I believe, I try to do it every 500 give or take
 
That's real for sure. It's so simple so why not. After I did it it sure made things quiet
 
CJ2Rox said:
That's real for sure. It's so simple so why not. After I did it it sure made things quiet
Click to expand...
I’m sure you know, but there is a grease point on the axle housing on the outer end of the rear axle on each side
 
Can one of you post pics of the grease points / lubrication areas; plus the grease gun make/model that works best for you.
 
AZROX said:
@Willys: there is a link to the entire servicei and repair manual somewhere on this forum. That manual will tell you more than you will likely ever need ro know about the Roxor.

There are also already a number of posts from a couple of years back about the grease points.

Grease points: leaf springs front (2), front and rear drive shafts (1 each), rear axles (one left, one right) towards the drum brakes. There is a 1/16 hole on top of the axle above the zirk fitting. Pump grease until a fine line of grease will come out of that small hole and you know the wheel bearings are greased.

There is also another link to the electrical trial wiring diagram.
Click to expand...
Thanks AZROX!
 
does the unit have greased fittings.
 
reedcharlie75 said:
The owners manual says every 400 miles I believe, I try to do it every 500 give or take
Click to expand...
where did you get an owners manual.
My dealer told me they have no owner manuals.
My 2022 does not come with one.
 
Wish it had more fittings. Like for the steering components, I will eventually upgrade them to be able to grease them. Also wish the U joints had them.
 
CJ2Rox said:
Wish it had more fittings. Like for the steering components, I will eventually upgrade them to be able to grease them. Also wish the U joints had them.
Click to expand...
The on the Rox heavy duty steering kit has greasable ends. Great upgrade
 
I believe they have a Labor Day sale right now, 10% off all OTR made products.
 
You must log in or register to reply here.
Back
Top