Diesel Freak or gilomenWho makes computer upgrades?
I had warranty work done on mine with it tuned. Guess it depends on the dealerJust be aware a computer upgrade voids your warranty
As a new owner, I’m looking for a consensus to prioritize most needed upgrades. It is important for me to spend what money I do have on Things that matter. Thank you for your recommendations.Research and learn what most people want to try and figure out was done years ago. Don’t try and reinvent the wheel but rather learn from history and mod accordingly. A lot of the old flatty tech applies to the roxor.
roxor specific:
do the tune to gain power and speed
Suspension. Either shocks and/or springs. Max‘s kit is best for ride. The spring overs have issues with spring life when wheeled. learn from those that came before us. lift springs help over stock, but longer YJ springs help even more.
check fluid levels and use appropriate fluids and repack front wheel bearings.
wheel it, drive it. Enjoy it.
My opinion from most important to leastHi everybody,
im curious what everybody thinks is the most important upgrades to our Roxor in order of importance.
I haven’t seen adjusting the steering limiting bolts. Free to do, and improved my turning radius from poor to just bad…My opinion from most important to least
**check all fluids along with grease zerks ensure it's properly greased up**
1) intake correction kit for boost
2)ecm tune
3)windshield
4)turn signals
5)Locking hubs
6)high flow air filter
7)RX41 turbo
8)intercooler
9)radiator fan
10)clutch
Would you put that on a 16” original rim?I have a 2022 and in my opinion just because the gear ratio is very low, I would would put 33” tires on it to get the rpm’s down. That’s the first thing I would do
I know the question was intended for another member on the chat. Though, Doschewy is spot on in regards to bigger tires/lower RPMs. I have the 5.38 gears like you, they sucked with the factory tires. Once I put 33s on my factory rims it massively changed the look of Roxor, and lowered the RPMs drastically, especially when I drive on the highway going 65 mph for hours at a time. Just one small little price you must pay, and that is the turning radius; however, worth the cost in my opinion.Would you put that on a 16” original rim?