My buddy has a Roxor and I do scanning and engineering, what do you want?

[MonsterMaxx]

Hate to give bad reviews but I purchased the grab handles on April 1st. It's been almost a month and I can't get any updates on my purchase. I've left voice messages, text messages, emails and a personal message from this forum.
Has anyone else purchased anything from this company? If something changes I'll post it here. But as of now....Purchase at your own risk.

This is simply not true Vinny. I sent you a very long email explaining the situation in response to your threatening email to dispute the charges with your credit card company. My response was made within hours of your first contact. Sent Monday 4-21-25 at 9:13PM
see below:
---------------------------------------------------------------------------------------------------------------------------------------------------------
I’m really struggling with it. In prototype the finish under the support area wasn’t great, but I figured it be easy to tune out. It’s been anything but easy. I’ve wasted 5 lots of material, countless hours and IDK if I’m any closer than I was in prototype. I did get one set that wasn’t horrible, but not up to my standards. Since then I’ve tried numerous times and am not getting acceptable results or I get them where the support structure won’t come off at all.

I’m not giving up, device is running now with yet another try. There’s a different machine that’ll run a different support material w/o making it a 4 day job, but it’s $$$ and not in stock anywhere + tariff’s are driving up the cost of it.

FYI: you have NOT been charged anything, so there’s nothing to dispute. The ‘charge’ only occurs when I ship the order.

Sorry for the delay.

Regards,
Robin Oury, owner
Unlimited Engineering

 

[Vinny]

Got a message from MonsterMaxx. He's running behind because of some issues with quality control. They are using a new machine and should be catching up with the orders. He sent me an email updating the status but I never received it. Anyway, I said I'd post if anything changed. I thank him for trying to reach out to me, who knows what happened to the email, and hope I receive them soon so I can give a review.

 

[Uncle Chuck]

Hey guys!
Just wanted to throw in my 2 cents here for what it’s worth…..
First, sometimes emails that I am expecting fall into my spam folder and I dont find out until much later since I dont check it every day. Dont know if you checked that…..
Second, I really appreciate everybody here being cordial and respectful. NOTHING ever created by the hand of man is perfect because we are not perfect. The pyramids of Egypt have stood for thousands of years, but even they are eroding away and will not last forever. This being understood, it is good for all of us to recognize that we are all human, and most of us are doing the best we can with what we’ve got. Until given a reason not to, I try to cut other folks a little slack while at the same time watching my own back.
Thanks for reading.
Enjoy yor Roxors! I sure love my 2019!!

 

[InfRoxor]

Make a kit that solves the factory, all weather cab leaking, noise making and insulation issues. Possibly insulation with a nice headliner.

 

[txroadkill]

Make a kit that solves the factory, all weather cab leaking, noise making and insulation issues. Possibly insulation with a nice headliner.

I think that’s Hard Cabs…

 

[Gabe]

Yes, I do not have the full cab nor did I want the all weather but the hard cabs stuff is good. I have the windshield, roof combo and really like it.

 

[InfRoxor]

I think that’s Hard Cabs…

Hard cabs looks awesome, but it’s $5,000 to $6,000. For those of us who already bought the factory cab, slapping that kind of money down isn’t something I can afford to do till I’ve paid it off.

 

[WY_ROX]

The rally tops is a bit cheaper, I sold my all weather cab for $1k. And threw it towards the rally top. I’ve been very happy with it, and great customer service also!

 

[Krazykevin58]

I would be interested in purchasing the files for the grab handle, I have a printer. My wife would appreciate some handles

 

[MonsterMaxx]

I have spent countless hours and hundreds of dollars in material and electricity trying to make these handles, up to my standards, and up til last night all have failed. Either the finish is poor or the supports are welded to the part and won't come off.

I now have a new machine that can handle this job. For reference I'm $6,500 into this 'upgrade' and I'm not done yet. Ugh. But now can make handles that look really nice and hopefully other cool stuff too.

I'm still tuning the program to get the very best results we can do, but I need to start recouping my investment so I'm willing to sell the 'prototypes' at half price. Once I'm done w/ tuning, the price will be $200 for the pair. I know this seems like a lot, but there's a tremendous amount of work that's gone into developing these, the runtime is long and the materials are expensive. There's also 2 hrs of digging support material off the parts - but it does come off now and leaves a nice finish under it.

For those of you asking for the 'file'. For one, I'm sorry, but I do not let my files out. For two, it will not run on your garden variety printer, I've tried relentlessly on some very nice printers and it's a no-go.

Anyway, if anyone is interested in handles I've got this red pair that are done ready to ship and have black material too.
I have another red pair back on the device (with some new tuning), and in 2 days (yes, it's a 2 day job) I can put Black on it if that's what someone wants.

Roxor Roll Bar Handle - Unlimited Engineering

Roxor Roll Bar Handle We set out to make a handle for the Roxor to make getting in and out easier and give people something to hang on to. After much development we came up with a product that does exactly what we wanted. The TPU material gives a soft rubbery feeling and should account […]

www.unlimitedengineering.com

Thank you for your patience while we perfect this project. Sorry I jumped the gun and put them up for sale before I was truly ready.


Regards,
Robin Oury, owner
Unlimited Engineering

 

[MonsterMaxx]

They are coming out really nicely, just finished up two sets and they look great. I think this process is finally perfected. Whew, it was a long haul. Hope y'all like these. LMK if you have any questions I can answer.

Roxor Roll Bar Handle - Unlimited Engineering

Roxor Roll Bar Handle We set out to make a handle for the Roxor to make getting in and out easier and give people something to hang on to. After much development we came up with a product that does exactly what we wanted. The TPU material gives a soft rubbery feeling and should account […]

www.unlimitedengineering.com

 

[Gabe]

looking forward to a few reviews and some more pics with them installed.

 

[USMC]

So, Robin,

What is the cost now? And are they positioned as a corner grab on a stock ROPS?