ooooooooooo

Need spring pivot pin leaf spring assembly

B

Benjamin Breeg

Member
Lifetime Member
Joined
Oct 13, 2024
Messages
41
Points
8
Location
Republic of Texas
Roxor Ownership
Roxor Owner
The 2019 we just bought was missing the nut needed to hold the spring pivot pin (part number 0097932) leaving the pivot pin hanging out of the front right leaf spring with barely a frog hair of “bolt” bolting the suspension together.

Where can I find the parts listed below? An hour of searching on here and the WWW has not left me confidence I will be able to fix my rig other than duct tape and baling wire. Current solution is pictured below. Roxor needs all listed parts in diagram except the leaf spring.

Thanks

IMG_2326.png IMG_2327.png IMG_2328.png IMG_2325.jpeg
 
And Bob R, I checked Roxor Parts Direct, and their website doesn’t have these. I’ll call manana and see if the can order them. Hope he fills out more inventory.
 
And has anyone ordered from this site? The part number pulls up, but this pivot pin doesn’t look like something that would cost <$2 making me think this could be a scam. Here is the damaged part and the screen shot of the website claiming to have the part.

I’ll try and quit replying to my own post!

IMG_2329.png IMG_2323.jpeg
 
Where in Texas are you? I have all the bolts/nuts from my old suspension when I did the long travel kit.
 
I have ordered a lot of Roxor OEM parts from Sherwood Tractor, based on the OEM part numbers and they have all been legit Mahindra Roxor Parts. I have no complaints about anything I have ordered from Sherwood Tractor.
 
txroadkill said:
Where in Texas are you? I have all the bolts/nuts from my old suspension when I did the long travel kit.
Click to expand...
Oh wow!! I'm in DFW Argyle area, and I would eagerly pay for shipping plus parts cost if you don't need them any longer. Please let me know!
 
Hummingbird Ranch said:
I have ordered a lot of Roxor OEM parts from Sherwood Tractor, based on the OEM part numbers and they have all been legit Mahindra Roxor Parts. I have no complaints about anything I have ordered from Sherwood Tractor.
Click to expand...
Awesome, Thanks HR. I contacted my nearest combo of real Mahindra dealership that sells 2024 Roxors in Hot Springs. A very helpful lady said she would contact Mahindra to see about ordering the parts as I was able to provide the part numbers. She said this was the first time as a dealership anyone had ever ordered Roxor parts which did not instill checkered flag confidence. She is supposed total me back this morning with a verdict. txroadkill Forum member may have a used part solution too. Hopefully I can get this Roxor moving as the bailing wire and Massey Ferguson bolt that is in there now is pretty sketchy.
 
Benjamin Breeg said:
Oh wow!! I'm in DFW Argyle area, and I would eagerly pay for shipping plus parts cost if you don't need them any longer. Please let me know!
Click to expand...
I’m about 400 miles south of ya. Let me find them in the barn this weekend. You looking for just one spring bolt/nut or need all 4? I’ll PM you with what I find and get a shipping address. I believe I know where they are.
 
Txroadkill, If you are about 400 miles South of DFW, that might put you pretty close to my ranch. I live in Fort Worth, but my ranch is just West of Langtry, Tx. Where abouts are you located? We might have to get together sometime when I am at my ranch for a cold one.

BB, as close as we are, I might have to meet you at the Hard Eight sometime for some brisket and a cold one.
 
Hummingbird Ranch said:
Txroadkill, If you are about 400 miles South of DFW, that might put you pretty close to my ranch. I live in Fort Worth, but my ranch is just West of Langtry, Tx. Where abouts are you located? We might have to get together sometime when I am at my ranch for a cold one.

BB, as close as we are, I might have to meet you at the Hard Eight sometime for some brisket and a cold one.
Click to expand...
Yea you’re still about 400 miles from me. I’m down by Corpus Christi.
 
I lied. You’re about 300 miles from. Had to look it up on the map. Don’t get out much on 90 anymore. Used to back when I lived in Uvalde. Now I just cruise 10 all the way out west when I’m rolling that way.
 
txroadkill said:
I lied. You’re about 300 miles from. Had to look it up on the map. Don’t get out much on 90 anymore. Used to back when I lived in Uvalde. Now I just cruise 10 all the way out west when I’m rolling that way.
Click to expand...
I should have thought of this sooner. I’m in SA about to trek the luxurious 35 corridor north for bumper car Indy action. If you are that way, I could retrieve parts.
 
Benjamin Breeg said:
I should have thought of this sooner. I’m in SA about to trek the luxurious 35 corridor north for bumper car Indy action. If you are that way, I could retrieve parts.
Click to expand...
You really should have spoken up sooner. I’m just now leaving San Antonio. Went up for a quick trip to the chrome shop. pm me your shipping address and I’ll drop them in the mail Monday.
 
Benjamin Breeg said:
The 2019 we just bought was missing the nut needed to hold the spring pivot pin (part number 0097932) leaving the pivot pin hanging out of the front right leaf spring with barely a frog hair of “bolt” bolting the suspension together.

Where can I find the parts listed below? An hour of searching on here and the WWW has not left me confidence I will be able to fix my rig other than duct tape and baling wire. Current solution is pictured below. Roxor needs all listed parts in diagram except the leaf spring.

Thanks

View attachment 14190 View attachment 14191 View attachment 14192 View attachment 14193
Click to expand...
 
Try Belmetric. They have everything metric, and they mail-order. Naturally, you will need to know the metric diameter of the bolt and its metric thread pitch, but I'll bet they have what you want. As a point of information, Belmetric is on the internet with everything they offer, and physically, they are an East Coast firm.
 
Land Rover said:
Try Belmetric. They have everything metric, and they mail-order. Naturally, you will need to know the metric diameter of the bolt and its metric thread pitch, but I'll bet they have what you want. As a point of information, Belmetric is on the internet with everything they offer, and physically, they are an East Coast firm.
Click to expand...
Thanks for the parts source. These bolts are crazy with a grease filling on one end and a grease port in the middle. Doubtful anyone but Mahindra supplies anything like this. I do need to replace some bolts holding on my rear bumper that are rusting and SAE. Doubt Lowes or HD have exactly what I need. If local Ace does not, I'll give these guys a try. Thanks.
 
You must log in or register to reply here.

Similar threads

chadwyatt
OEM Springs For Sale
Replies
0
Views
1K
chadwyatt
chadwyatt
Back
Top