OIL DRAIN PLUG WASHER - COPPER

[Boilermaker]

OIL DRAIN PLUG WASHER - COPPER
0311AAC00260N

So I'm not really wild about paying $1/washer. I overpay for a lot of other crap but not a washer.

As I don't have enough miles or time on my Roxie for my first oil change, I purchased a single OEM crush washer. I measured it with my digital caliper and the measurements came to 16.65mm x 22.03mm x 2.23mm.

I've ordered a 5 pack of what I think will work off of AliExpress for $1.73 shipped. I wont get them for probably 6 weeks but I'll keep you posted on receipt and how well they work out.

 

[Roxasuras]

How many Hrs/ miles are on your Roxor?

 

[Boilermaker]

Prolly 1 hour and 33 miles.

I haven't driven it much since purchase. I've had the hood up mostly...doing mods.

 

[Roxasuras]

Awesome, what mods have you done?

 

[Boilermaker]

Mile Marker hubs, XTC accessory fuse box, XTC turn signal kit, OTR fixed windshield, spare tire carrier, mounted washer basin under the hood, new horns (x2), mounted license plate holder to bumper, added license plate light, mirrors.

I know it doesn't sound like much, but I'm an IT guy...not really mechanically inclined.

 

[Roxasuras]

Nothing wrong with that my friend, how hard were the hubs to do? I may start posting videos for DIY repairs, replace, and upgrades

 

[Boilermaker]

Two things with the hubs:

1) You must have patience in getting the current dust covers off. I used 2x claw hammers.

2) You must replace the 12x hex bolts with 3/8-16 x 1-1/2 Socket Heads. There isn't enough room on the MM Locking Hub to put a socket wrench to tighten. So you have to replace with these so you can tighten with an Allen.

Here is what I used from Lowes:
https://www.lowes.com/pd/Hillman-3-8-in-16-x-1-1-2-in-Allen-Drive-Cap-Screw/3024573

You can definitely get them cheaper by purchasing from someplace else.

 

[Paulson]

I got mad and used a sledge hammer on the oe dust covers. Made for a quick job.

 

[DAMCars]

OIL DRAIN PLUG WASHER - COPPER
0311AAC00260N

So I'm not really wild about paying $1/washer. I overpay for a lot of other crap but not a washer.

As I don't have enough miles or time on my Roxie for my first oil change, I purchased a single OEM crush washer. I measured it with my digital caliper and the measurements came to 16.65mm x 22.03mm x 2.23mm.

I've ordered a 5 pack of what I think will work off of AliExpress for $1.73 shipped. I wont get them for probably 6 weeks but I'll keep you posted on receipt and how well they work out.

How did those crush washers work out? Do you have a link?

 

[lcp]

OIL DRAIN PLUG WASHER - COPPER
0311AAC00260N

Here's a few washers I just found at NAPA that seem to work fine. I just installed the first one on the list and it seems to be working great.

 

[Barnboy]

Good to know

 

[2dutz2]

OIL DRAIN PLUG WASHER - COPPER
0311AAC00260N

So I'm not really wild about paying $1/washer. I overpay for a lot of other crap but not a washer.

As I don't have enough miles or time on my Roxie for my first oil change, I purchased a single OEM crush washer. I measured it with my digital caliper and the measurements came to 16.65mm x 22.03mm x 2.23mm.

I've ordered a 5 pack of what I think will work off of AliExpress for $1.73 shipped. I wont get them for probably 6 weeks but I'll keep you posted on receipt and how well they work out.

Heart it up to red with a torch, let cool use it over , rc

 

[FP4550]

Checkout with below link ask Support they can help with Cheaper Options with Best OEM Quality.

Mahindra Spares Archives - SparesHunt