So the cj7 windshield fits..... what about cj tube fenders?

[BigDaddy]

I ordered some, and plan on modifying as needed, but i was curious what others have noticed.

 

[lawtac]

Please keep us updated, very interested in this.

 

[BigDaddy]

i think the tube fenders will fit, but i will have to make inner fenders as I don't want to cut up the oem fenders

 

[lawtac]

I have never seen them in person, but metalcloak makes cj tube fenders that include aluminum inner fenders, might be worth taking a look at.
Overline(tm) Flat Tube Fenders Jeep CJ

 

[i303]

The Roxor has the shorter fenders of the early CJ5/CJ6/M38A1 and not the CJ7 fenders. Don't know if they are a direct bolt on but they look like they are.

 

[BigDaddy]

i303 is correct, the cj7 fenders are 5.5" too long. Looking at the picture below it appears to be immediately after the wheel well.

I am not put off by the thought of cutting and modifying as much as i am by the inner fender issue

 

[BigDaddy]

found a right inner fender...

Right inner fender panel fits Willys MB, GPW, CJ2A 41-49 | eBay

 

[BigDaddy]

I also noticed that the roxor has embossed reinforcements along bottom of tub, and outline of wheel wells, which willys do not.

This will require the use of a spacer to install rear tube flares/armor, but looks promising

 

[BigDaddy]

i wanted to put some quality trim adhesive material between body and these arches to protect paint anyways

 

[BigDaddy]

i did order front and rear bumpers too...

They are not a bolt on, but very simple to fabricate some mounting brackets....

 

[jrobz23]

You may be able to modify the section of the fenders that interface with the grill. The grill is different from the early grills and those fenders are made for later grills which are also slightly different than early 5s (I havea 57 and did some measuring/poking right when I got the Roxor).

If you try to use an early grill, you may have to modify the stock hood. You can use a early hood, but then you gotta figure out how to interface cleanly with the cowl (which is narrower on the Roxor).

Ideally, someone just makes high clearance fenders. Given that the stockers are decently cut from the factory, and that early 5s never really got any (to my knowledge), I'm not sure there will be a big demand for these.

 

[ROXORSE46]

i did order front and rear bumpers too...

They are not a bolt on, but very simple to fabricate some mounting brackets....

View attachment 1165View attachment 1166View attachment 1167View attachment 1168View attachment 1169View attachment 1170

Where can I get these bumpers?

 

[toolsinaction]

Where can I get these bumpers?

AMAZON look up EAG

 

[toolsinaction]

i did order front and rear bumpers too...

They are not a bolt on, but very simple to fabricate some mounting brackets....

View attachment 1165View attachment 1166View attachment 1167View attachment 1168View attachment 1169View attachment 1170

I ordered that same bumper. I didn't see a way to fit it without cutting out the frame middle tube or having it stick way out. It will be interesting to see how you fit it.

 

[Shrimp92]

Any updates on bumper fitment BigDaddy?

 

[lawtac]

The Roxor has the shorter fenders of the early CJ5/CJ6/M38A1 and not the CJ7 fenders. Don't know if they are a direct bolt on but they look like they are.

So has anyone test fitted the “early” CJ5/M38A1 fenders on the roxor?

 

[Appellandscape]

These bumpers are on sale $130 i ordered one ill let you know how it goes if it goes.